Most community and public pools have capacity limits this summer. Make sure to get your summer pool ordered early so you can splash around all summer long. But, if these consideration boxes are easily checked off in your situation, then I wouldn’t hesitate to add an Intex metal-frame pool to your summer plans. I also cannot stress enough that Intex metal-frame pools must be set-up on ground that is extremely level and that attaining this may require extra work and costs. For as cheap as my Intex pool was and how easy it was to set up, I was absolutely certain that it was not going to last.
Store the poles and connectors separately, to prevent any punctures to the liner during storage. Clean the liner with a gentle soap and water solution, and allow it to dry thoroughly. The only safe way to heat an Intex pool is by using a solar blanket. Intex sells solar blankets (which look like bubble-wrap), though these blankets do not have high user ratings. We purchase every product we review with our own funds — we never accept anything from product manufacturers. You will want to ensure that the place where you want to install it is large enough to accommodate the entire set up.
I did the shock yesterday and the blue floor now is lost. A pool water monitoring kit is necessary to adjust the chlorine and pH levels of the pool. Chlorine, alkaline pH adjusters, and acid are available at any local hardware or pool store. Once the ground is leveled, it is wise to lay a weed-preventing cloth over the dirt. This will prevent any grass from growing into the pool liner. Some types of grass (specifically, St. Augustine and Bermuda) have been known to puncture the pool liners of Intex pools.
Depending the size you go for, you may need an extra pair of hands. For the most part, however, Intex pools can be fully set up in anywhere from 30 mins to a few hours. Every Intex pool uses a strong, 3-ply polymer material for the pool walls and floor.
Aside from your daily tasks, your pool will also need to be shocked (or super-chlorinated) regularly. This is a high-dose chlorine treatment that sort of resets your intex purespa chemicals and gets them balanced again. The first thing you’ll need to do is to remove any visible debris with a skimmer (that’s that big net on a long pole).
If the bar is stuck to the actual liner, turning it will sometimes help loosen it. If you are trying to dislodge the first horizontal bar , then try raising the vertical bars at an angle until you can slide one end of the horizontal bar out. It is a tricky thing to do – but once the first one is out, the rest of the bars are easy.
We have a well so we could not fill the pool using a garden hose. Instead, our local fire department delivered a portion of the water for the pool. We filled the remainder with water from a pond on our property. The pool holds 8,403 gallons when it is 90 percent filled. The frame snaps together quickly and requires no outside tools to assemble thanks to Intex’s Easy Lock System, which uses a push-button connector to assemble the poles. They slide together and, more importantly, come part easily.
Placing and filling the pool with water on a uneven surface can cause the pool to be unstable, even collapsing and causing personal injury or property damage. Check residential city codes to see if you are required to intex purespa install a fence around the pool area for safety purposes. If you’re looking to set up a full-fledged above-ground pool for summertime fun, take a look at these frame sets for above-ground pools and outdoor pools.