Check your local pool supply stores who usually understand local water conditions, for further information. Test the water with a sodium tester strip according to the instructions on the label. Place the strip in a small cup of pool water for five minutes, and check the strip. The salt/water intex frame pool ratio should be in the 3,000 to 3,500 parts of salt per gallon range. If there isn’t enough salt add a couple pounds, and check the sodium level again with another test strip. If you have too much salt, run plain water into the pool for about 20 minutes and check the sodium level again.
The problem is, these test kits don’t measure free chlorine up to the levels required to perform a SLAM. Save yourself the headache and get a good kit up front. Yes, the Saltwater System will work in all water conditions. However, intex frame pool you may find it desirable to treat your water , if it is hard or has high levels of calcium, etc. Calcium can form white scale on the titanium plates in the electrolytic cell, thus requiring more frequent cleaning.
There was only one time that we had to add some salt to our system. We had pretty heavy rainfall for a couple of days straight that raised the water level in our pool quite a bit. We either needed intex frame pool to drain it back down to where it was or add more salt to accommodate the extra water. We love that these pools use natural salt, so they are environmentally safe and don’t irritate the skin.
The length of time that the Saltwater System should run will depend on your local conditions, including temperature, rainfall, size of pool, and number of swimmers using the pool. See Owner’s Manual for operating time table list. You may wish to add other chemicals to your pool water, depending on the local characteristics of your water supply. It may be desirable to further soften your water, or add clarifiers or algaecides. However, in many instances, additional chemicals are not needed. If you add other chemicals to the water, there will be no impact on the salt in your pool.
However from our experience we recommend doing a manual salt ppm check prior to adding more salt as the salt level monitors on many makes of generators can give misleading readings. The normal values for correct pool hygiene are between 3000 and 3500 ppm . A tree branch fell on our pool and ended the season early. Rare hard to find intex saltwater system is in very good original unrestored condition. What are your experiences with in-text salt water systems on above ground pools?.
The manual contains a table providing the recommendations of the settings based on calcium hardness. For your monthly cleaning of your Intex saltwater pool, you need to test your pool water thoroughly and balance your pool water chemicals. The chief complaint that we see is people getting an error indicating a high salt level. The owner’s manual states that a reasonable rate is 3000 to 4000 PPM, depending on the size of the pool. These systems seem to work great until you go over the 3000 PPM mark.