Greenworks, at its own discretion, will repair or replace any and all parts found to be defective, through normal use, free of charge to the customer. Turn nut to the left to remove blade B , spacer , and positioner . Release the start handles and self-propel levers to turn off the headlight. • Pull up on the drive lever , then press the start button . While you hold the start button , grab the start handles in the direction of the handle bar.
Use of safety gloves and proper footwear is recommended when working outdoors. Wear sturdy, rough-soled work shoes and close-fitting slacks and shirts. Shirts and pants that cover the arms and legs and steel-toed shoes are recommended. Never operate this machine in bare feet, sandals, slippery or lightweight (e.g., canvas) shoes. Repair any damaged parts before restarting and operating the lawnmower.
Greenworks 40V mower boasts a 60 minute battery and I’m like… So? … Unless you have ¼ to ½ an acre yard this is simply not enough time to cut your yard – Especially if yo4 use the NOS, I mean turbo button. Until a battery can last 2 hours at full blast it’s simply not enough for me. But if you have a ¼ acre yard then this should be plenty for you! Another note, battery changes on this appear to be extremely intuitive and simple to do. Greenworks also provides a 4 year tool & battery warranty which is pretty long in my opinion.
Many battery-powered mowers require a two-step process of pressing the on button followed by the blade starter handle—in that order. The GreenWorks setup is also two-step, but it doesn’t matter in what order it’s done. It’s not a big thing, but it is one less thing to think about. Tap the Position button at the bottom of the screen to see where the mower is and where it’s been on a satellite map. There’s also a Frost Guard setting that monitors the current temperature and will delay the work cycle if there’s a risk of frost.
DPois Mens Mesh Sheer See Through Boxers Shorts Drawstring Casual Lounge Underwear. Greenworks Pro 3000 PSI 2.3-Gallon-GPM Cold Water Electric Pressure Washer. Greenworks Pro 3000 PSI 2.3-Gallon-GPM Cold Water Electric Pressure Washer, Winter Beanie w/Visor & Earflaps for Men Women Outdoor Fleece Hat Scarf Set. Cut quality declines on tall grass, Can get bogged down in thick grass. We looked at the top and dug through the reviews from some of the most popular review sites.
You won’t be left thinking “will it, won’t it” every time you wheel it out onto the lawn, and it won’t require you to expend a lot of energy to fire the motor up either. When we tried to use the self-propel lever, we did indeed feel a small jolt of speed…and that was it. Adjusting the speed settings showed no appreciable slow down or speed.
The higher airflow also helps prevent clogging when mowing tall or wet grass. Remove the safety key and battery pack from the machine before maintenance. Always remove the safety key and battery pack after you complete the work. Pull the height adjustment lever rearward to increase the cutting height. Keep cutting edges sharp and clean for best and safest performance. Follow instructions for lubricating and changing accessories.
Most of our grass is Bahia with some sections of St. Augustine. Greenworks is tossing its hat into the battery-powered zero-turn ring. We initially saw prototypes for the Greenworks Pro 60V zero-turn lawn mower and its lawn tractor cousin a couple of years ago.
I had the lever moved about 3/4 the way to hare and the self-propelled walking speed was too slow for me—and I’m a leisurely mower. Yet the full-on hare setting was too fast resulting in a small selection range between too slow and too fast. Keep in mind that mowing speed is a personal thing, so YMMV.
Push the battery pack into the battery compartment until the battery pack locks into place. Align the ribs on the battery pack with the grooves in the battery compartment. RisRemove objects that can be thrown by the blade in any direction. Wear safety glasses.DANGER –Steep Slope HazardUse extra caution on slopes. Never operate the mower without proper guards, plates, or other safety protective devices in place.