Others are as large as the Ultimate Frame Pool line, with several sizes available in between. We have the 14’ X 42” and find that it fits our needs nicely. Find the size that fits your yard and your family the best. If this is the first pool you’ve ever had, installation can be a pain because you need to make sure the ground where you want it is flat. It’s a lot of hard work, but once the ground’s ready, set-up is pretty simple.
But, if these consideration boxes are easily checked off in your situation, then I wouldn’t hesitate to add an Intex metal-frame pool to your summer plans. I’m also not super thrilled that the cover Intex sells as an accessory, blows off in the slightest of winds; a problem if you don’t want to clean leaves and bugs out of your pool each day. Although, many online reviews state that owner’s keep theirs up all winter long with no issues, should you decide to take the risk. Intex pools need to be set-up on extremely level ground.
If your pool is on sand, you can prevent vertical supports from “digging in” from the weight of the water by placing small rectangular plywood pads under the pool supports as shown here. I also drilled intex frame pool a hole through each support and screwed to the plywood piece to prevent sliding toward the liner. In the majority of cases, frame pools become unusable because of the liner and not the frame.
Thus, despite the large size, the pool requires minimum time for assembly and almost no tools. Additionally, the kit includes a removable pool ladder, a ground cloth, and a pool cover. Intex prism frame pools have intex frame pool become the next stage of frame pool development. But what’s the improvement in this Intex metal vs. prism battle? Both Prism Frame and Ultra XLR frames use stronger alloy compared to Intex’s metal frame pools.
The other advantage of using a professional pool pad is some of them come precut to the size of your pool, which saves a lot of time and mucking around during installation. You can use an Intex ground cloth to go under an Intex, Bestway, Summer Waves or Kiddie pool. Carpet is great to go under kiddie pools, Summer Waves and Bestway inflatable pools. They provide thick padding and will feel great under your feet. Provided you install them on a level surface, the bottom of the pool will feel nice and smooth. Here’s a list of the most popular materials to put underneath an above ground pool, whether it’s on grass, pavers, gravel or concrete.
Therefore, at this time our warehouse does not allow will-call pickups.
Insert all horizontal supports into the 3-way tees and fasten with the provided insert pin and rubber washer.. Don’t forget the rubber washer that the insert goes through! The very last horizontal support may be fastened by removing the other pin on the support and allowing it to temporarily intex frame pool be pushed into the next tee. Turn off the pump and make sure the suction ports are closed off, otherwise when you disconnect the tube from the return water will flow through the pump and drain from the pool. First, double check to make sure that everything is ready and within arm’s reach.
You’ll want to be able to grab what you need quickly since you will be losing some water during parts of this process. Also, make sure that there are no tools or anything on the ground near the pool that can’t get wet. You might also want to wear shorts and take off your shoes.